Jump to content
  • 0

flickering of some "tooltips windows" in UI


sojer2005

Question

Hi,

I have noticed some odd flickering of tooltips windows across different parts of UI (main screen, inventory, etc).

Playing in 1920x1080 at 60 Hz, vsync is on.

 

 

Video to demonstrate: link (Aloth tooltip window is flickering)

 

 

Does anyone notice this too?

  • Like 2
Link to comment
Share on other sites

22 answers to this question

Recommended Posts

  • 0

Same here (GeForce 980, but was present with my 770 too). Hard to troubleshoot intermittent problems, so my heart goes out to whomever gets this ticket :)

Link to comment
Share on other sites

  • 0

GTX 970 here and have noticed the same thing.  It's fairly spurrious, definitely not game breaking - but always makes me blink a few times..

 

I should also note that the nvidia drivers on this machine are up to date, v364.51 at the time of this writing, but I'm pretty sure I've noticed this visual glitch prior to the latest driver update..

Edited by tid242
Link to comment
Share on other sites

  • 0

I ran into this issue as well, basically anything in the top inventory row has this tool tip flicker.  Turning Vsync off just slows the rate of flicker for me.  When the flicker is slowed, it looks like it's caused by the UI having trouble deciding what height to make the tool tip popup window ( the bottom is fixed and the top flickers up and down causing the text in the window to flicker also due to vertical auto-spacing.  The closer to the top of the tool tip window the text is, the more flickering occurs because of the greater shifting due to the text auto-alignment in the window.

 

Switching the resolution to a mode with 60Hz refresh rate appears to eliminate the flicker, but I don't want to do this since the only option to run at my monitor's native resolution of 1920x1200 is @ 59 Hz.

 

I was able to get the specific incident of flickering to go away by applying a resolution that wasn't 1920x1200 @ 59Hz, then exiting the game, relaunching the game, then switching back to 1920x1200 @ 59Hz.  I haven't figured out if adding the -popupwindow argument to the launcher has any effect on the bug. We shall see if it shows up again.  

Link to comment
Share on other sites

  • 0

Bump.

 

I didn't know about this thread so I made my own. Sorry.

 

http://forums.obsidian.net/topic/91135-305-shaky-popup-thingies/

 

 

Hey guys,

 

Thanks for bringing this to our attention. Fortunately we are already aware of the issue and have a bug in the system. 

 

Thanks a bunch!

 

Is there still something going on?

Edited by Messier-31

It would be of small avail to talk of magic in the air...

Link to comment
Share on other sites

  • 0

The eye strain from this bug is killing me.  Does anyone have any other ideas on why this is happening or how to address it?  Changing resolutions has not worked.  It's kind of ruining the game for me.  I've come to terms with all the myriad combat bugs, but when I can't even bear to look at item tooltips I don't see how I can play this game.

 

Link to comment
Share on other sites

  • 0

That's an old bug, which is still here (v3.06).

 

If it helps: I've noticed that it is related to global font scale (from settings > graphics).

 

In my case I had to change it from 130% to 127%, and flickering is gone :)

  • Like 2
Link to comment
Share on other sites

  • 0

That's an old bug, which is still here (v3.06).

 

If it helps: I've noticed that it is related to global font scale (from settings > graphics).

 

In my case I had to change it from 130% to 127%, and flickering is gone :)

 

DAYUM! I mean it still happens but a lot less frequently  :thumbsup:

Edited by Messier-31

It would be of small avail to talk of magic in the air...

Link to comment
Share on other sites

  • 0

I'm not sure if this will help resolve the issue but changing font scale from the default seems to have fixed the issue in my last play session.  Adjusting it to any number seems to have fixed the jittery ui for the select skill tooltip.  Others who are experiencing the problem, please test and verify if this works for you.  

Playing on 3.06.1254

 

Using 6700k/980ti

Link to comment
Share on other sites

  • 0

For playing in 1440p resolution a font scale of 110% seems to have (so far) eliminated it for me.

Excellent advice MaxQuest! :)

That's an old bug, which is still here (v3.06).

If it helps: I've noticed that it is related to global font scale (from settings > graphics).

In my case I had to change it from 130% to 127%, and flickering is gone :)

 

As for why this happens in the first place... I have a partial guess.

 

Basically I think it's a botched update-order of UI-elements / UI-scripts.

Undesired UI behavior, i.e. vibrations, could emerge from the subtle interactions of these points:

1. Each UI text-bubble consists of a couple of grouped UI elements.

2. The position of these elements depends on the size of other elements in the group, basically automatic layout / vertically stacking them.

3. There is some special adjustment going on, causing something akin to coordinate rounding, probably trying to align text to screen pixels?

4. When the layout of elements depend on the layout of other elements, the (element layout) update order becomes vital!

 

To understand why point 4) is so important let me explain to you why and how it can cause UI layout to flicker with a simple but representative example:

Imagine having three UI elements stacked vertically. Lets simply call them Top, Middle and Bottom to make it easy to follow.

One of these elements is our anchor, by which I mean that its coordinates are determined by something external to our example (e.g. by the position of your mouse pointer).

In the case of PoE, bottom-up seems to be the way floating UI elements are "anchored" most of the time - regardless it is what I will go with for this example.

As for the other two elements, i.e. Middle and Top, their coordinates are relative such that the Middle depends on Bottom, and Top depends on Middle.

Basically lets call the vertical coordinate y, and assume the top of the screen is y = 0 in which case the above description can be eloquently expressed by these simple equations:

Bottom.y = [some input value] - Bottom.height
Middle.y = Bottom.y - Middle.height
Top.y = Middle.y - Top.height

So far so good.

What could go wrong, right?

 

 

Well the above coordinates need not be integers, they can be floats, and now imagine that for text rendering we have some pixel-alignment script, that rounds positions in such a way as to give nicely rendered text (to avoid text blur).

Such a script would cause a small change in the elements y-value, which might seem innocent enough until you realize it can cause a cascading effect with a delay of one update cycle.

(The update cycle might or might not be coupled to frames - it's not important but perhaps easier to understand if it is, so for simplicity we can assume it is a 1 frame delay. Don't worry if this sounds confusing I'm going to explain it properly below.)

Specifically if the script and UI-element update order isn't properly determined, then we can randomly get "bad ordering" for some parts of the UI and not others.

So what is a "bad ordering", and how does it actually manifest as flicker?

 

We'll see this in the most clear way by putting in actual numbers into the simple equations above, and then follow the flow of execution for a "bad ordering" case through the rendering of two consecutive frames:

1. Lets assume the mentioned text-to-pixel alignment is applied to all three of our UI elements; Bottom, Middle, and Top.

2. Pick some random value for [some input value], lets say 800.0 for this example (any value will do).

3. Pick some "bad ordering" of UI script execution so we can showcase the issue. For this example lets go with the following order:

[Calculate all height values] --> [Calculate all y values] --> [Perform all text-to-pixel alignment]

Looks deceptively innocent right? Well anyway I also have to specify the relative order in which our UI elements update.

This is also part of the order and we can't look at the execution flow without determining it. Lets assume the following order for our (unfortunate) example:

Top --> Middle --> Bottom

Still looking deceptively safe and sound? Wrong!

 

4. Render the first frame:

a) Calculate all height values - Lets say our UI elements have the following heights:

Top.height = 124.8

Middle.height = 50.4

Bottom.height = 98.2

b) Calculate all y values*:

Top.y = 526.6   (651.4 - 124.8 )

Middle.y = 651.4   (701.8 - 50.4)

Bottom.y = 701.8   (800.0 - 98.2)

c) Perform pixel alignment (basically some rounding scheme, lets go with round-to-nearest):

Top.y = 527   (+0.4)

Middle.y = 651   (-0.4)

Bottom.y = 702   (+0.2)

d) Draw our UI elements (at the above coordinates).

 

*Lets assume that asking for an y-value that has not been previously calculated / cached triggers its calculation,

 so for the very first frame we actually have Bottom->Middle->Top order. Lets refer to this as the "cache assumption".

 (We are doing simple layout on a flat surface so any sane UI configuration should be free of circular dependencies.)

 

5. Render the second frame:

a) Calculate height values - These have not changed so refer to 4.a above.

b) Calculate all y values:

Top.y = 526.2   (651.0 - 124.8 )

Middle.y = 651.6   (702.0 - 50.4)

Bottom.y = 701.8   (800.0 - 98.2)

c) Perform pixel alignment:

Top.y = 526   (-0.2)

Middle.y = 652   (+0.4)

Bottom.y = 702   (+0.2)

d) Draw our UI elements (at the above coordinates).

 

...Oops!

Notice that the coordinates for Top and Middle are no longer the same - they have changed by one pixel!

 

Now there are multiple caveats with this particular example...

1. If you continue to render frame 3, 4, 5, etc. you will discover that our UI elements continue to climb higher and higher on the screen. Obviously this is not the case in practice so this particular example is extremely horrible - i.e. the actual code used in PoE is much better than this, but as an introduction to the importance of execution order and how it can cause small instabilities this example is simple and sufficient enough.

2. Pixel alignment has been over-simplified. In practice for a multi-row piece of text, each line needs to be aligned separately, which might affect the height.

3. The actual gui has a smarter design, but I believe the flaw is of the same nature to the one presented here - i.e. something somewhere in the code is reading a stale value from the previous frame, causing elements to move slightly from one frame to the next.

 

Edit:

Gave it some further thought....

A more probable implementation is that the y-values of each element is independent of the y-values of the other elements - instead depending on a sum of heights, e.g:

Top.y = [some input value] - Top.height - Middle.height - Bottom.height.

The y-values are (seemingly) decoupled from each other thanks to this, affording much more stability.

And (seemingly) pixel alignment wont affect this.

...

Until you realize point 2 above about how multi-row text-to-pixel alignment might affect height very slightly.

Because unlike my first example above, which is completely unstable and derails at the smallest error, this approach would be much more stable.

But a small difference in height of one element, can push another element by a very small amount, even less than a single pixel, and that could still affect how the different rows of that second element gets aligned, which in turn can slightly change the height of the second element, and so and and so forth.

Why this is a resonable hypothesis of what's actually going on is because in this case the "drift" of the elements is bounded by the size of the adjustment that pixel alignment can make and the number of elements involved - it can never drift infinitely like my first example, but it can make small oscillations!

 

Edit2:

By the way, the reason why fiddling with v-sync might seem to help some people is very simple:

The oscillations happen over the frames rendered (fps), which is not the same as frames drawn to the screen.

So if your fps is about twice* the refresh-rate of your monitor, then you will only see every other frame, effectively preventing you from seeing the oscillation.

It is still technically occurring but never visibly displayed on your monitor. (*or any other multiple of 2)

Edited by AnorZaken
  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...