Gorgon Posted July 23, 2009 Share Posted July 23, 2009 Because of the hot weather my CPU cooler has been making a lot of noise when playing games. Then last night when I was playing Clear Sky it went completely overboard, sounding like a jet engine taking off, I had to stop playing. It's the same with other games. CPU stays around 25 C though, so it's not failing, its merely getting extremely noisy for some reason. So, recommendations on a quiet CPU cooler, that is, quiet both under low and high loads. Na na na na na na ... greg358 from Darksouls 3 PVP is a CHEATER. That is all. Link to comment Share on other sites More sharing options...
Pidesco Posted July 23, 2009 Share Posted July 23, 2009 Because of the hot weather my CPU cooler has been making a lot of noise when playing games. Then last night when I was playing Clear Sky it went completely overboard, sounding like a jet engine taking off, I had to stop playing. It's the same with other games. CPU stays around 25 C though, so it's not failing, its merely getting extremely noisy for some reason. So, recommendations on a quiet CPU cooler, that is, quiet both under low and high loads. It went overboard in Denmark, at night? It's not the hot weather that's the problem. "My hovercraft is full of eels!" - Hungarian touristI am Dan Quayle of the Romans.I want to tattoo a map of the Netherlands on my nether lands.Heja Sverige!!Everyone should cuffawkle more.The wrench is your friend. Link to comment Share on other sites More sharing options...
Gorgon Posted July 23, 2009 Author Share Posted July 23, 2009 Maybe not, just saying the evenings are hot. Na na na na na na ... greg358 from Darksouls 3 PVP is a CHEATER. That is all. Link to comment Share on other sites More sharing options...
Humodour Posted July 23, 2009 Share Posted July 23, 2009 Maybe not, just saying the evenings are hot. Saying 'evenings are hot' here would typically mean the temperature is over 30 Celsius. To the topic: maybe you just have a bum fan? Link to comment Share on other sites More sharing options...
Gorgon Posted July 23, 2009 Author Share Posted July 23, 2009 Well that follows, so, whats quiet at high loads. I have bought Zalman in the past, and have been happy with them, but they sometimes have issues with very low RPMS, below what the CPU fan timer thinks is acceptable and once in a while it would auto shutdown at low loads. Na na na na na na ... greg358 from Darksouls 3 PVP is a CHEATER. That is all. Link to comment Share on other sites More sharing options...
Humodour Posted July 24, 2009 Share Posted July 24, 2009 Well that follows, so, whats quiet at high loads. I have bought Zalman in the past, and have been happy with them, but they sometimes have issues with very low RPMS, below what the CPU fan timer thinks is acceptable and once in a while it would auto shutdown at low loads. I generally don't run CPU's fast enough that they need super cooling so no clue sorry. Link to comment Share on other sites More sharing options...
Janmanden Posted July 28, 2009 Share Posted July 28, 2009 It has been quite hot in Denmark in July and at night too. While the air isn't very hot, there hasn't been much of a wind and the old house works like a stone oven heating all night. I'e never had a Zalman cooler, which were actually quiet under any other setting than the minimal, but everyone of them was completely useless, when cooling was really needed. They look nice, but that's all they do. I suggest getting something like the Thermalright SI-128 or one of the Thermalright Ultra-120 or any other model designed for a 120mm fan. (Signatures: disabled) Link to comment Share on other sites More sharing options...
CoM_Solaufein Posted July 28, 2009 Share Posted July 28, 2009 I haven't had any issues with the Zalman I use for my 8400. War is Peace, Freedom is Slavery, Ignorance is StrengthBaldur's Gate moddingTeamBGBaldur's Gate modder/community leaderBaldur's Gate - Enhanced Edition beta testerBaldur's Gate 2 - Enhanced Edition beta tester Icewind Dale - Enhanced Edition beta tester Link to comment Share on other sites More sharing options...
bhlaab Posted August 1, 2009 Share Posted August 1, 2009 (edited) ARCTIC COOLING Freezer 7 Pro probably the best cpu fan ever http://www.newegg.com/Product/Product.aspx...N82E16835186134 At full load using prime95 my temps never even get past 40c and it doesnt sound like my fan is even going any faster than normal to compensate Edited August 1, 2009 by bhlaab Link to comment Share on other sites More sharing options...
I want teh kotor 3 Posted August 2, 2009 Share Posted August 2, 2009 I use a Coolermaster V8 and it works great... However, its rather large (I had to remove a 120mm fan from my case, and its not a small case) and it can get loud... But I generally recommend Coolermaster... In 7th grade, I teach the students how Chuck Norris took down the Roman Empire, so it is good that you are starting early on this curriculum. R.I.P. KOTOR 2003-2008 KILLED BY THOSE GREEDY MONEY-HOARDING ************* AND THEIR *****-*** MMOS Link to comment Share on other sites More sharing options...
Gorgon Posted August 26, 2009 Author Share Posted August 26, 2009 So after some trial and error it turns out that it's the fan on my radeon 4850 that is making the howling noise. No sound when it's doing virus scan on quick mode (100% CPU load) How hard is it to replace the stock fan on one of these things. I don't have a lot of modder's savvy. Na na na na na na ... greg358 from Darksouls 3 PVP is a CHEATER. That is all. Link to comment Share on other sites More sharing options...
taks Posted August 26, 2009 Share Posted August 26, 2009 while i don't have any expertise with radeon, i'm pretty sure it's no different than any other video card. you'll simply have to take the case off and remove the fan and/or heatsink (if they are attached). shouldn't be difficult. may just need to be cleaned out. my vid card is the dirtiest component in my case (i've been mucking with a noisy system lately, too, but it was case fans causing the problem). taks comrade taks... just because. Link to comment Share on other sites More sharing options...
Gorth Posted August 27, 2009 Share Posted August 27, 2009 while i don't have any expertise with radeon, i'm pretty sure it's no different than any other video card. you'll simply have to take the case off and remove the fan and/or heatsink (if they are attached). shouldn't be difficult. That was my experiences with replacing the cooling on an ATI 4970x2 too. Just make sure you keep track of all those darn little screws and have some thermal paste handy before starting I cheated a bit and read the instruction pamphlet that came with the cooling though. “He who joyfully marches to music in rank and file has already earned my contempt. He has been given a large brain by mistake, since for him the spinal cord would surely suffice.” - Albert Einstein Link to comment Share on other sites More sharing options...
Gorgon Posted August 27, 2009 Author Share Posted August 27, 2009 (edited) So there are replacement (well one would hope superior) cooling units out there guaranteed to work on my card ? I assume this kind of operation would void the warranty as well. I could, I suppose, just send the card back, but I just know that would take forever and a day. I would need a set of tiny screwdrivers as well. I don't have anything like that lying around. Although buying new tools is always nice. Edited August 27, 2009 by Gorgon Na na na na na na ... greg358 from Darksouls 3 PVP is a CHEATER. That is all. Link to comment Share on other sites More sharing options...
Humanoid Posted August 28, 2009 Share Posted August 28, 2009 Arctic Cooling Accelero S1 (rev 2) is a few years old but still better than anything else out there. Can potentially run passive with good case airflow but I'd cable-tie a 120mm slow fan onto it personally (such as a Scythe Slipstream 800/1200rpm). L I E S T R O N GL I V E W R O N G Link to comment Share on other sites More sharing options...
Gorgon Posted August 28, 2009 Author Share Posted August 28, 2009 Ah yes, developments since the top of the thread though. What I have now is an arctic cooler 7. It was quite cheap and it works perfectly. The problem is the fan on my radeon 4850. Na na na na na na ... greg358 from Darksouls 3 PVP is a CHEATER. That is all. Link to comment Share on other sites More sharing options...
Humanoid Posted August 28, 2009 Share Posted August 28, 2009 I did link a GPU cooler, and yes, it's compatible with the R4850. L I E S T R O N GL I V E W R O N G Link to comment Share on other sites More sharing options...
Gorgon Posted August 28, 2009 Author Share Posted August 28, 2009 Ahh thanks. The installation looks a bit complicated, especially since they don't offer technical drawings for all the different cards. How do I know what a voltage regulator looks like. Looks like quite a fun little project nonetheless. Na na na na na na ... greg358 from Darksouls 3 PVP is a CHEATER. That is all. Link to comment Share on other sites More sharing options...
Sargallath Abraxium Posted August 29, 2009 Share Posted August 29, 2009 Xigmatech ...WHO LUVS YA, BABY!!... A long, long time ago, but I can still remember, How the Trolling used to make me smile. And I knew if I had my chance, I could egg on a few Trolls to "dance", And maybe we'd be happy for a while. But then Krackhead left and so did Klown; Volo and Turnip were banned, Mystake got run out o' town. Bad news on the Front Page, BIOweenia said goodbye in a heated rage. I can't remember if I cried When I heard that TORN was recently fried, But sadness touched me deep inside, The day...Black Isle died. For tarna, Visc, an' the rest o' the ol' Islanders that fell along the way Link to comment Share on other sites More sharing options...
taks Posted August 29, 2009 Share Posted August 29, 2009 How do I know what a voltage regulator looks like. do you have any information other than "voltage regulator?" in particular, a part number or chip manufacturer. absent that information, it depends. more than likely it will be near the power connector (assuming the radeon uses that extra connector), and it will look like a simple chip with not very many leads, and possibly a large heatsink on it. the heatsink on a high power regulator, however, is not what you think. it's often more like a tab, and that's the part that is soldered to the board (with 3 to 5 leads coming out the other side). here's an example of a TO-220 regulator package as i just described. the heatsink is the little tab thing on the top. here's an example of a regulator that comes in several dozen formats as well 5 different packages. there could also be some little ones (like the SOT-223 package) in various places used for precision power control/isolation of certain circuits, and they could be anywhere on the board. with more information, i could provide a better answer. taks comrade taks... just because. Link to comment Share on other sites More sharing options...
Gorth Posted August 30, 2009 Share Posted August 30, 2009 He could stick his tongue on it and see if it tastes "funny" “He who joyfully marches to music in rank and file has already earned my contempt. He has been given a large brain by mistake, since for him the spinal cord would surely suffice.” - Albert Einstein Link to comment Share on other sites More sharing options...
Gorgon Posted August 30, 2009 Author Share Posted August 30, 2009 Appreciate the info, I might possibly be too technically inept for it to be of any use, we'll see once I have the replacement cooler. Na na na na na na ... greg358 from Darksouls 3 PVP is a CHEATER. That is all. Link to comment Share on other sites More sharing options...
Gorgon Posted September 7, 2009 Author Share Posted September 7, 2009 (edited) An update. Deciding to give the inside of the box a good cleaning I discovered that the filter on the big case fan situated next to the GFX slot was more a solid mass of accumulated dust than a filter. I took it out, and now the machine runs with quite tolerable noise levels. The R4850 has an only just capable cooler and doesn't respond well at all to bad airflow. Edited September 7, 2009 by Gorgon Na na na na na na ... greg358 from Darksouls 3 PVP is a CHEATER. That is all. Link to comment Share on other sites More sharing options...
taks Posted September 9, 2009 Share Posted September 9, 2009 cleaning out fans often changes noise levels... taks comrade taks... just because. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now