tarna Posted March 25, 2007 Share Posted March 25, 2007 (edited) Since this board software will not allow me to attach the actual screensaver, please go to http://reallyslick.com/ for the package. Be warned however!!! the screensaver package ( at 11 Mb ) is a tremendous resource hog to lesser systems. 'Hyperspace' is well worth it though if your system can run it. It is the most kick-ass! screensaver that I've seen. It also will not work on any other rig I've put it on other than mine. What I'm getting at is what system resource is it loading that causes it not to run on anything less than mine ( Post your system specs page #2 )? I've loaded it on Intel 2.7 Gh and not had it run properly. I've loaded it on AMD Semprons 1.8 w/ 1 Gb ram and a decent video card and not had it word. Actually, I've not been able to load it on any system other than my own and had it work. What does it require? Edited March 25, 2007 by tarna Ruminations... When a man has no Future, the Present passes too quickly to be assimilated and only the static Past has value. Link to comment Share on other sites More sharing options...
Deraldin Posted March 25, 2007 Share Posted March 25, 2007 (edited) I got them all to run on my computer except for skyrocket which didn't seem to want to start. I might have not given it enough time to start though so I'll check again at some point that isn't 2am. I had a good 50+ FPS in all of them except Helios and Hyperspace which both averaged around 15FPS with a minimum of about 12 and spikes up to the low 20's. EDIT: Don't even start Bok... I already know that you've got like a thousand FPS in some of those. Edited March 25, 2007 by Deraldin Link to comment Share on other sites More sharing options...
Bokishi Posted March 25, 2007 Share Posted March 25, 2007 They all work. Current 3DMark Link to comment Share on other sites More sharing options...
LadyCrimson Posted March 25, 2007 Share Posted March 25, 2007 They all run on my computer too; I don't think the pc even sweated. Hyperspace gets 45-60fps and the rest were in the 100's, with occasional bursts of 200's depending on what it was drawing. My mo'bo/pc may not be all shiny but apparently it's just fine. I don't really see how the files together being 11MB makes it a resource hog - each individual .scr file isn't that large ... but I don't know how screensavers work/pull resources so ... “Things are as they are. Looking out into the universe at night, we make no comparisons between right and wrong stars, nor between well and badly arranged constellations.” – Alan Watts Link to comment Share on other sites More sharing options...
Bokishi Posted March 25, 2007 Share Posted March 25, 2007 In lattice, my fps is 950 Current 3DMark Link to comment Share on other sites More sharing options...
LadyCrimson Posted March 25, 2007 Share Posted March 25, 2007 (edited) Braggart. Even when they were only playing in the little display properties preview window the numbers didn't go higher than around 500-800. harhar, lol P.S. They are very cool screensavers. I like the fireworks one - complete with sound. Edited March 25, 2007 by LadyCrimson “Things are as they are. Looking out into the universe at night, we make no comparisons between right and wrong stars, nor between well and badly arranged constellations.” – Alan Watts Link to comment Share on other sites More sharing options...
Bokishi Posted March 25, 2007 Share Posted March 25, 2007 I'm using this as my screensaver atm. It rawks, especially the motion blur whee http://www.nzone.com/object/nzone_geoforms_home.html Current 3DMark Link to comment Share on other sites More sharing options...
WITHTEETH Posted March 25, 2007 Share Posted March 25, 2007 In lattice, my fps is 950 my fps read as: FPS = 85 . 000 ??? How did you get 950 and i only got 85 dude bro?! Always outnumbered, never out gunned! Unreal Tournament 2004 Handle:Enlight_2.0 Myspace Website! My rig Link to comment Share on other sites More sharing options...
Deraldin Posted March 25, 2007 Share Posted March 25, 2007 In lattice, my fps is 950 my fps read as: FPS = 85 . 000 ??? How did you get 950 and i only got 85 dude bro?! Do you have Vsync enabled in your graphics card properties? Link to comment Share on other sites More sharing options...
WITHTEETH Posted March 25, 2007 Share Posted March 25, 2007 In lattice, my fps is 950 my fps read as: FPS = 85 . 000 ??? How did you get 950 and i only got 85 dude bro?! Do you have Vsync enabled in your graphics card properties? Only when its requested by a program, its not forced on. I have a 7900GT OC'd by XFX Always outnumbered, never out gunned! Unreal Tournament 2004 Handle:Enlight_2.0 Myspace Website! My rig Link to comment Share on other sites More sharing options...
Deraldin Posted March 25, 2007 Share Posted March 25, 2007 In lattice, my fps is 950 my fps read as: FPS = 85 . 000 ??? How did you get 950 and i only got 85 dude bro?! Do you have Vsync enabled in your graphics card properties? Only when its requested by a program, its not forced on. I have a 7900GT OC'd by XFX Try turning it off completely. If it's stuck at 85FPS and never dips below that then it sounds like it's being capped by vsync. Link to comment Share on other sites More sharing options...
Bokishi Posted March 25, 2007 Share Posted March 25, 2007 Yea shut off vsync and watch your fps fly like mad Current 3DMark Link to comment Share on other sites More sharing options...
WITHTEETH Posted March 25, 2007 Share Posted March 25, 2007 OK, Thats better, my average is about 600fps now. ... Impressive Bo. Im saving my bucks for the next generation of graphic cards after the 800 series . Still Ill never be able to SLI though. Ill be ready ready for physics and 1333 CPU's still. Always outnumbered, never out gunned! Unreal Tournament 2004 Handle:Enlight_2.0 Myspace Website! My rig Link to comment Share on other sites More sharing options...
tarna Posted March 26, 2007 Author Share Posted March 26, 2007 Try turning it off completely. If it's stuck at 85FPS and never dips below that then it sounds like it's being capped by vsync. How do I get to that screen? This may be why I cannot get it to run on my wife's computer. Ruminations... When a man has no Future, the Present passes too quickly to be assimilated and only the static Past has value. Link to comment Share on other sites More sharing options...
Bokishi Posted March 26, 2007 Share Posted March 26, 2007 Umm not really. Vsync regulates framerates so it wont go over your monitor's refresh rate, therefore preventing tearing. Your usually capped at 60 or 85 fps (whatever you're monitor's refresh rate is. Something interesting: With vsync off, I notice a strange phenomenon where the tearing goes away (or reduced by 90%) when the fps goes over 500. I noticed this in HL2 Current 3DMark Link to comment Share on other sites More sharing options...
tarna Posted March 26, 2007 Author Share Posted March 26, 2007 Umm not really. Vsync regulates framerates so it wont go over your monitor's refresh rate, therefore preventing tearing. Your usually capped at 60 or 85 fps (whatever you're monitor's refresh rate is. Something interesting: With vsync off, I notice a strange phenomenon where the tearing goes away (or reduced by 90%) when the fps goes over 500. I noticed this in HL2 Then this might be interesting for my system as my monitor refreshes at @ 18 milliseconds. My FPS is about 60 with an Athlon 64 4800+ and the same with an FX-60 ( hyperspace ). Also, my wife's system is a Sempron 3000+ ( I think ( 1.6 Gb )) with an ATI Radeon 9250 video card. 1 Gb of RAM. I bought the materials on two separate trips and put it together before I realized that the 754 socket was obsolete. I can locate an Athlon 64 3700+ ( motherboard's maximum ) but it's kinda pricey so I'd like to know before I spend the money if it's actually the problem. She mostly plays casino games with her system but when she saw the screensaver running on my rig and not on hers, she immediately saw a difference in systems. I have a spare Geforce FX5500 ( 256 Mb ) video card if that is the issue. Ruminations... When a man has no Future, the Present passes too quickly to be assimilated and only the static Past has value. Link to comment Share on other sites More sharing options...
Bokishi Posted March 26, 2007 Share Posted March 26, 2007 Radeon 9250 is old no wonder she can't run it. Current 3DMark Link to comment Share on other sites More sharing options...
tarna Posted March 26, 2007 Author Share Posted March 26, 2007 Try turning it off completely. If it's stuck at 85FPS and never dips below that then it sounds like it's being capped by vsync. How do I get to that screen? And yet the question still remains... I'll add the FX5500 to her system and see how it goes though. Ruminations... When a man has no Future, the Present passes too quickly to be assimilated and only the static Past has value. Link to comment Share on other sites More sharing options...
LadyCrimson Posted March 26, 2007 Share Posted March 26, 2007 What screen? To turn off vsync? It's usually in the video card's performance/quality control menus somewhere. “Things are as they are. Looking out into the universe at night, we make no comparisons between right and wrong stars, nor between well and badly arranged constellations.” – Alan Watts Link to comment Share on other sites More sharing options...
tarna Posted March 28, 2007 Author Share Posted March 28, 2007 What screen? To turn off vsync? It's usually in the video card's performance/quality control menus somewhere. 'Somewhere' being the operative word here. Ruminations... When a man has no Future, the Present passes too quickly to be assimilated and only the static Past has value. Link to comment Share on other sites More sharing options...
Gorth Posted March 28, 2007 Share Posted March 28, 2007 Not sure if this is the one you are looking for... when I get back to my Nvidia equipped machine, I'll see if I can find the equivalent setting there. It's the one called "Wait for vertical refresh" I think. “He who joyfully marches to music in rank and file has already earned my contempt. He has been given a large brain by mistake, since for him the spinal cord would surely suffice.” - Albert Einstein Link to comment Share on other sites More sharing options...
LadyCrimson Posted March 28, 2007 Share Posted March 28, 2007 Heh, I'd forgotten some cards use odd (or not common) phrases for it. I think my husband had an old card where it was lost in a bizarre set of sub-menus. “Things are as they are. Looking out into the universe at night, we make no comparisons between right and wrong stars, nor between well and badly arranged constellations.” – Alan Watts Link to comment Share on other sites More sharing options...
metadigital Posted March 30, 2007 Share Posted March 30, 2007 Try turning it off completely. If it's stuck at 85FPS and never dips below that then it sounds like it's being capped by vsync. Aha! I wondered why Deus Ex plateaued at 60fps (my monitor's frequency), to the point that when I start playing after a cold boot and long cessation of PC activity, Denton and the NPCs all hare around like someone has the video on cue! OBSCVRVM PER OBSCVRIVS ET IGNOTVM PER IGNOTIVS OPVS ARTIFICEM PROBAT Link to comment Share on other sites More sharing options...
.jpg.ce846aae50e732dc4985eb712252381f.jpg)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now