Simple bed respawn glitch

[Jennzio]

I set my spawn point on my bed and the next time I died, I respawned inside my bed and couldn't jump or move. I had to recycle my bed and lost one of my feather pieces.

[Fletch Dude]

1 hour ago, Jennzio said:

I set my spawn point on my bed and the next time I died, I respawned inside my bed and couldn't jump or move. I had to recycle my bed and lost one of my feather pieces.

I heard it's a bug of course. But to work around it if you have a flat roof right above it. You need more space above the bed.

[McSquirl Nugget]

space above doesn't matter.  i had the vaulted roof above my bed and it still did it.  had another bed outside under the stars on a balcony and it still did it.  both were on plank floors.  I built a bed on a clay foundation the other day but forgot to test the respawn there.  Doing that at lunch.

[McSquirl Nugget]

Did some testing finally at lunch a bit ago.  I know having a simple bed on a plank floor on a scaffolding is bugged, you get stuck in the bed.  Confirmed it happens pretty much anywhere.  I tested it on a plank floor on the ground with a floor/roof piece right above

Tried it on a plank floor with roof tiles and a plank floor connecting, 2 wall lengths high

out in the open on a clay foundation

and finally just out in the open

All of these instances get you stuck in the bed.  EXCEPT the one above just out in the open on the ground.  This one, when you respawn into it, makes you fall into the earth, and you get a cool view of the landscape from underneath

But then, you get stuck in a respawn loop.  You fall through the earth, you die, you respawn, fall through the again, wash rinse repeat.  Luckily i had an autosave just before i created the bed out here by the Oak Tree, so i was able to load that and continue on with the game.

[RazielDERF]

On 9/2/2020 at 7:12 PM, Jennzio said:

I set my spawn point on my bed and the next time I died, I respawned inside my bed and couldn't jump or move. I had to recycle my bed and lost one of my feather pieces.

This issue was fixed on the patch that was released Friday. You shouldn't have this issue anyhow. If you do submit a ticket to support team.